PIG-PIT (Asbury, NJ)

We always get the question, "so what can you guys manufacture?" to which we usually reply, "A.F.A.B.- Anything for a buck!" We mean it.

A customer approached us about making a PIG-PIT, a holding chamber for cooking pig in, and we gladly took on the job. This is a rectangular box, 96" x 72" x 42" OD, with 4" thick walls. It has a small 3" diameter hole in the center of the floor for drainage. The project took two pouring days, and took 1.9 cubic yards of concrete. Four recessed pocket lifts in the floor will be used to lift and move the piece.